LD Systems DJ500 Power Amplifier 2 x 250 W 4 Ohms

Overview

LD Systems DJ500

The LD Systems DJ500 is a robust and reliable power amplifier capable of the power and sound your PA systems needs. Featuring Class AB technology with an output of 250W per channel @ 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations.

The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front panel and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ500 functions in the entire frequency range of 20Hz – 20kHz with extremely high dependability, dynamics, and impulse fidelity. •Class AB power amplifier •Delivers 2x 250W into 4Ω •Full range frequency response •Switchable ground lift & bridge/stereo mode •Designed and engineered in Germany

Spec

Product number: LDDJ500

Product type: Power Amplifiers

Type: PA Power Amplifiers

Rated ouput power (1kHz): •2 x 250W (4 Ohms) •2 x 150W (8 Ohms) •500W (Bridged, 8 Ohms)

Output circuitry: Class A/B

Frequency response: 20 – 20000Hz

THD: 0.05%

Gain: 30dB

Input sensitivity: 0.85V

Protection circuits: over-current, soft start, DC, short circuit, thermal overload

Controls: On / Off, ground lift, mode, volume

Indicators: clip, Power, protect (protection circuit engaged)

Line input connectors: 2x 6.3 mm Jack, 2x XLR

Speaker output connections: 2x Terminal posts, 2x Speakon compatible

Cooling: fan

Operating voltage: 230 V AC

Dimensions: 483 x 88 x 298mm

Weight: 9 kg