LD Systems DJ300 Power Amplifier 2 x 150 W 4 Ohms

Overview

LD Systems DJ300

The LD Systems DJ300 is a robust and reliable power amplifier capable of the power and sound your PA systems needs.  Featuring Class AB technology with an output of 150W per channel @ 4 ohms and 250W in 8-ohm bridge mode. Its sturdy construction paired with low weight makes it perfect for DJs in mobile use and smaller permanent installations.

It has extensive protection circuitry, a low-noise cooling fan, and a power-on delay. It uses XLR and stereo TRS sockets as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ300 functions in the entire frequency range of 20Hz – 20kHz with high dependability, dynamics, and impulse fidelity. •Class AB power amplifier •Delivers 2x 150W into 4Ω •Full range frequency response •Switchable ground lift & bridge/stereo mode •Designed and engineered in Germany

Spec

Product number: LDDJ500

Product type: Power Amplifiers

Type: PA Power Amplifiers

Rated ouput power (1kHz): •2 x 150W (4 Ohms) •2 x 100W (8 Ohms) •250W (Bridged, 8 Ohms)

Output circuitry: Class A/B

Frequency response: 20 – 20000Hz

THD: 0.05%

Gain: 28dB

Input sensitivity: 0.85V

Protection circuits: over-current, soft start, DC, short circuit, thermal overload

Controls: On / Off, ground lift, mode, volume

Indicators: clip, Power, protect (protection circuit engaged)

Line input connectors: 2x 6.3 mm Jack, 2x XLR

Speaker output connections: 2x Terminal posts, 2x Speakon compatible

Cooling: fan

Operating voltage: 230 V AC

Dimensions: 483 x 88 x 298mm

Weight: 8.5 kg