Sennheiser MD 445
The Sennheiser MD 445 Dynamic Vocal Microphone pushes the potential of dynamic microphones to the limits. Offering a direct and focused sound, the MD 445 gives every voice presence and intensity. Delivering sophisticated transparency and richness of low and middle ranges to create unparalleled acoustic closeness.

What’s more, the MD 445 has been precisely tailored to suit modern stages and demanding productions. While an all-new highly developed aluminium-copper voice coil forms the basis for a direct and nuanced sound. A high-rejection supercardioid microphone, the MD 445 systematically blocks out ambient noise. So you’re guaranteed the most protection from unwanted feedback

Above all, the MD 445 is a high-end microphone that’s sure to take your sound to the next level!

• Dynamic vocal microphone
• Very lightweight, rapidly responding aluminum- copper voice coil
• High-resolution, direct sound for audibly greater proximity to the vocals
• Directionality: high-rejection supercardioid
• Extremely high feedback resistance
• Large diaphragm diameter
• Spring-mounted capsule to shield it from body-borne noise
• Hum compensation coil to eliminate electromagnetic interference
• Rugged metal design

Frequency response (Microphone): 40 – 20,000 Hz

Weight: 329 g

Nominal impedance: 245 Ω

Min. terminating impedance: 1 kΩ

Dynamic range: 145 dB(A)

Transducer principle (Microphone): dynamic

Pick-up pattern: high rejection supercardioid

Sensitivity in free field, no load (1kHz): 1.6 mV/Pa -55.9 dBV/Pa

Max. sound pressure level: 163 dB

Equivalent noise level: 18 dB(A)

Connector: XLR-3m

Dimensions: Ø 47.5 x 174 mm