Shure

Shure BLX24 / PG58 Wireless Handheld System M17

$599.99 $447.99
You save: $152.00
Current stock: 0
Description

Description

Shure BLX24 / PG58 Wireless Handheld System M17

 

The BLX24/PG58 Wireless Vocal System from Shure joins world-class design and construction with simple and easy setup and operation, featuring QuickScan frequency selection and the trusted PG58 professional quality vocal microphone capsule for lead and backup vocal performance applications. Legendary sound and performance, right out of the box.

For performers who wish to unplug from the wire, BLX Wireless Systems are the clearest choice. Shure delivers wireless confidence with legendary sound from industry-renown microphones, decades of wireless design proficiency and world-class construction.

Included: BLX4 wireless receiver; BLX2/PG58 handheld transmitter with integrated PG58 cardioid dynamic microphone capsule; microphone clip.

BLX2 Handheld Transmitter

- Up to 14 hours of continuous use (2AA batteries)
- Up to 300 feet (100m) transmission radius (line of sight)
- Quick and easy frequency matching (GROUP and CHANNEL selection buttons)
- Two-color transmitter status indicator LED
- Green: "Ready"
- Rapidly Flashing Red: "Controls Locked"
- Solid Red: "Battery Power Low" (less than 1 hour remaining)
- Flashing Red/Power Down: "Batteries Dead" (replace batteries to repower transmitter)
- Integrated microphone capsule design, featuring trusted PG58
- -10 dB gain attenuation
- Lightweight, rugged construction
- Color ID caps (available separately)

BLX4 Single-Channel Receiver

- One-touch QuickScan frequency selection quickly locates the best open frequency (in case of interference)
- Up to 12 compatible systems per frequency band (region-dependent)
- Two-color audio status indicator LED
-- Green: Normal audio levels
-- Red: Excessive audio levels (overload/clipping)
- XLR and 1/4" output connectors

 

System Specifications

Working Range 91 m (300 ft)

Line of Sight Note: Actual range depends on RF signal absorption, reflection and interference.

Audio Frequency Response 50 to 15,000 Hz

Note: Dependent on microphone type

Total Harmonic Distortion Ref. ±33 kHz deviation with 1 kHz tone 0.5%, typical

Dynamic Range 100 dB, A-weighted, typical

Operating Temperature -18°C (0°F) to 57°C (135°F)

Note: Battery characteristics may limit this range.

Polarity Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of lowimpedance output) and the tip of the high impedance 1/4-inch output.

NOTE: All Specifications are subject to change. Performance may vary depending on country regulations and operating environment.

Component Specifications BLX1 Bodypack Transmitter

Audio Input Level gain max: -16 dBV maximum min (0 dB): +10 dBV maximum

Gain Adjustment Range 26 dB

Input Impedance 1 MΩ RF

Transmitter Output 10 mW, typical varies by region

Dimensions 110 mm x 64 mm x 21 mm (H x W x D)

Weight 75 g (2.6 oz.), without batteries

Housing Molded ABS

Power Requirements 2 LR6 AA batteries, 1.5 V, alkaline Battery Life up to 14 hours (alkaline)

BLX4 Wireless Receiver & BLX88 Dual Wireless Receiver

Output Impedance

XLR connector: 200 Ω 6.35 mm (1/4”) connector: 50 Ω

Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone XLR connector: –27 dBV (into 100 kΩ load) 6.35 mm (1/4”) connector: –13 dBV (into 100 kΩ load) RF

Sensitivity -105 dBm for 12 dB SINAD, typical Image Rejection >50 dB, typical Dimensions BLX4: 40 mm X 188 mm X 103 mm (H x W x D) BLX88: 40 mm X 388 mm X 116 mm (H x W x D) Weight BLX4: 241 g (8.5 oz.) BLX88: 429 g (15.1 oz.) Housing Molded ABS Power Requirements 12–15 V DC @ 160 mA (BLX88, 320 mA), supplied by external power supply (tip positive) www.shure.com/asia ©2013 Shure Asia Limited BLX2 Handheld Transmitter Audio Input Level gain 0dB: -20 dBV maximum -10dB: -10 dBV maximum Gain Adjustment Range 10 dB RF Transmitter Output 10 mW, typical varies by region Dimensions 224 mm X 53 mm dia. (8 7/8 X 2 1/8 in.) Weight 218 g (7.7 oz.) (without batteries) Housing Molded ABS Power Requirements 2 LR6 AA batteries, 1.5 V, alkaline Battery Life up to 14 hours (alkaline) BLX4R Wireless Receiver Output Impedance XLR connector: 200 Ω 6.35 mm (1/4”) connector: 50 Ω Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone XLR connector: –20.5 dBV (into 100 kΩ load) 6.35 mm (1/4”) connector: –13 dBV (into 100 kΩ load) RF Sensitivity -105 dBm for 12 dB SINAD, typical Image Rejection >50 dB, typical Dimensions 50 mm X 198 mm X 163 mm H x W x D Weight 998 g (2.2 lb.) without antennas Housing Molded ABS, steel Power Requirements 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)

Reviews

Reviews (0)

Be the first to review this product.
Additional Info

Additional Info

Weight:
2.00 KGS