Panasonic PT-DX100EK XGA 10,000 Lumens Dual Lamp 1-Chip DLP Projector

Current stock: 0


Panasonic PT-DX100EK XGA 10,000 Lumens Dual Lamp 1-Chip DLP Projector Panel.IconsPana3Y43DLPDLink Overview Specifications What's In The Box Video Key Features * 1-Chip DLP projection system; 4:3 Native aspect ratio * 10,000 ANSI Lumen, WXGA (1024 x 768) native resolution * 10,000:1 Contrast ratio, Powered zoom / focus lenses (optional) * Video In: HDMI, DVI-D, 5 BNC, VGA, Composite * Built-in Wired network / Digital Link, 3D Sync In & Out, RS-232 * Support Active 3D projection, Edge blending, Color matching, Dynamic RGB booster, 360o Flexible installation, Portrait mode (optional), 24/7 operation and more Enjoy High Picture Quality and Highly Flexible Projection Panasonic PT-DX100EK XGA 10,000 Lumens Dual Lamp 1-Chip DLP Projector Download Brochure Download Manual Distance Calculator Bright 10,000/8,500 lm from Compact Body A unique dual-lamp drive system has helped to make the body compact, while two newly developed, high-output, 420 W lamps provide high brightness of 10,000 lm for the PT-DX100 and 8,500 lm for the PT-DZ870/DW830. Dynamic Iris for a High 10,000:1* Contrast Ratio Panasonic's Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1* contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures. Dynamic Iris for high 10,000:1 contrast ratio * Full on/off, with dynamic iris on. The New Dynamic RGB Booster Enhances Both Brightness and Color Reproduction Panasonic's RGB Booster achieves high image quality with levels of color reproduction and brightness that make each color stand out. It combines Panasonic's proprietary Vivid Color Control technology with a Lamp Modulation Drive System for a 1-chip DLP(TM), projector that produces bright and vivid colors. This has been further advanced in the PT-DZ870 Series with the development of the Dynamic RGB Booster. Images are analyzed frame by frame, and scene-linking and realtime modulation are used to achieve high brightness and vivid color reproduction. Conventional System Because the lamp power was fixed, color reproduction was enhanced by sacrificing brightness. Dynamic RGB Booster Images are analyzed frame by frame, and the lamp output is modulated to match each scene. This achieves optimal brightness and color reproduction for a wide variety of scenes. Conventional System Dynamic RGB Booster The boost amount is controlled in real time as the images are projected. Note: The above images are simulated. Vivid Color Control This unique control technology optimizes the use of the color segment areas of the color wheel. It increases the brightness of each RGB color by minimizing the unallocated portions between the colors, to achieve truly vivid coloring. Lamp Modulation Drive System With the advanced lamp modulation technology, the projector is able to control the lamp intensity for each of the red, green, blue, and white segments of the color wheel separately. Because the actual light output is controlled in relation to each color segment, light usage is optimized and color balance is obtained without lowering the brightness. This results in bright vivid images with increased color fidelity. Detail Clarity Processor 3 Gives Natural Clarity to Even the Finest Details Detail Clarity Processor Brings Depth and Clarity to Details This unique Panasonic circuit optimizes the sharpness of each image, based on the super-high-, high-, medium-, and low-frequency components of the extracted image information. The resulting images have more natural, lifelike expression. System Daylight View 2 for Enhanced Color Perception This unique Panasonic technology optimizes image quality to improve the color perception of the projected image in bright rooms. With a brightness of 10,000 lm*, it provides highly comfortable viewing even in bright lighting, and allows viewers to concentrate easily on the images. * For the PT-DX100. 8,500 lm for the PT-DZ870 and PT-DW830. DICOM Simulation Mode* Panasonic DICOM Simulation ModeThis imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity. * This product is not a medical instrument. Do not use it for actual medical diagnosis. Rec. 709 Mode for HDTV Projection Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source are projected. Waveform Monitor Function Waveform Monitor FunctionWhen the output level of the source device fluctuates due to the performance of the device or its cable connections, the original black and white levels of the image content cannot be reproduced correctly. With the PT-DZ780 Series projector you can view the waveforms on the screen and adjust the settings either automatically or manually as you prefer. Advanced Technologies for Excellent Image Quality 3D color management system Full 10-bit image processing Progressive cinema scan (3:2 pulldown) Dynamic sharpness control Digital noise reduction IP conversion AI scene control 2:2 pulldown mode sRGB compatibility Specifications Power Supply 120-240 V AC, 10-5.2 A, 50 / 60 Hz Power Consumption 1,030 W (1,060 VA) (0.3 W when STANDBY MODE set to ECO*1, 3 W when STANDBY MODE set to NORMAL) Dissipation BTU 3,516 BTU/hour (without light PT-DZ870/DW830: 3,400 BTU/hour, PT-DX100: 3,379 BTU/hour) DLP(TM), Chip Panel Size 17.8 mm (0.7 in) diagonal (4:3 aspect ratio) Display Method DLP(TM), chip x 1, DLP(TM), projection system Pixels 786,432 (1,024 x 768) pixels Lens PT-DZ870 / DW830 / DX100 Powered zoom (throw ratio 1.8-2.5:1), powered focus F 1.7-1.9, f 25.6-35.7 mm PT-DZ870L / DW830L / DX100L Optional powered zoom/focus lenses and fixed-focus lens Lamp 420 W UHM lamp x 2 Screen Size (diagonal) 1.27-15.24 m (50-600 in), 1.27-5.08 m (50-200 in) with the ET-DLE055, 2.54-8.89 m (100-350 in) with the ET-DLE030, 4:3 aspect ratio Brightness*2 10,000 lm (dual-lamp, LAMP MODE: NORMAL) Centre-to-Corner Uniformity*2 90% Contrast*2 10,000:1 (full on/full off, in dynamic iris 3 mode) Resolution 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.) Scanning Frequency SDI 3G-SDI - HD-SDI - SD-SDI - HDMI/DVI-D fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 25-162 MHz RGB fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower YPBPR (YCBCR) fH: 15.75 kHz, fV: 60 Hz [480i (525i)] fH: 15.63 kHz, fV: 50 Hz [576i (625i)] fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p] fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i] fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i] fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p] fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p] fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p] fH: 31.50 kHz, fV: 60 Hz [480p (525p)] fH: 31.25 kHz, fV: 50 Hz [576p (625p)] fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p] fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i] fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p] fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF] fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p] Video/YC fH: 15.75 kHz, fV: 60 Hz [NTSC / NTSC4.43 / PAL-M / PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL / PAL-N / SECAM] Optical Axis Shift*3 Vertical +50 % from center of screen (powered)*4 Horizontal 10 % from centre of screen (powered) Keystone Correction Range Vertical 40o*9 Keystone Correction Range with the Optional Upgrade Kit ET-UK20*10 - Installation Ceiling / floor, Front / rear Terminals SDI IN - HDMI IN HDMI 19-pin x 1 (Deep Colour, compatible with HDCP) DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR/YC x 1) RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1) 3D SYNC 1 IN/OUT BNC x 1 (3D timing signal) 3D SYNC 2 OUT BNC x 1 (3D timing signal) VIDEO IN BNC x 1 (composite video) SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant) SERIAL OUT D-sub 9-pin (male) x 1 for link control REMOTE 1 IN M3 x 1 for wired remote control REMOTE 1 OUT M3 x 1 for link control (for wired remote control) REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel) LAN / DIGITAL LINK RJ-45 x 1 (for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink(TM),, Deep Colour, compatible with HDCP) Cabinet Materials Molded plastic Dimensions (W x H x D) PT-DZ870 / DW830 / DX100 498 x 200*8 x 556 mm (19-19/32 x 7-7/8*13 x 21-7/8 in) (with supplied lens) PT-DZ870L / DW830L / DX100L 498 x 200*8 x 513 mm (19-19/32 x 7-7/8*13 x 20-3/16 in) (without lens) Weight*14 PT-DZ870 / DW830 / DX100 Approximately 18.3 kg (40.3 lbs) (with supplied lens) PT-DZ870L / DW830L / DX100L Approximately 17.6 kg (38.8 lbs) (without lens) Operation Noise*2 40 dB (dual lamp operation, lamp mode: NORMAL), 35 dB (dual lamp operation, lamp mode: ECO) Operating Environment Operating temperature: 0-45 oC (32-113 oF)*15, operating humidity: 10-80 % (no condensation) Applicable Software Logo Transfer Software, Multi Projector Monitoring & Control Software Supplied Accessories Power cord with secure lock, wireless/wired remote control unit, batteries (R03/AAA type x 2), software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) NOTE * Product numbers vary depending on the market. The general guideline is as follows: The product number in the Americas and Taiwan is PT-DZ870KU/DZ870WU/DZ870LKU/DZ870LWU, PT-DW830KU/DW830WU/DW830LKU/DW830LWU, and PT-DX100KU/DX100WU/DX100LKU/DX100LWU. The product number in Europe, CIS, Asia (except Taiwan), Oceania, Middle East, and Africa is PT-DZ870KE/DZ870WE/DZ870LKE/DZ870LWE, PT-DW830KE/DW830WE/DW830LKE/DW830LWE, and PT-DX100KE/DX100WE/DX100LKE/DX100LWE. *1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 Optical axis shift cannot be operated with the ET-DLE055. *4 +45 % from centre of screen with the ET-DLE085. *5 30o with the ET-DLE085/DLE055 and +5o with the ET-DLE030. *6 20o (8o with the ET-DLE085/DLE055) when using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function. *7 When using the KEYSTONE corrections of the Geometric Adjustment function. *8 15o (8o with the ET-DLE085/DLE055) when using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function. *9 Not operable with the ET-DLE030. *10 Up to a total of 55oduring simultaneous horizontal and vertical correction. *11 40o with the ET-DLE150/DLE250/supplied lens, 22o with the ET-DLE085/DLE055 and +5o with the ET-DLE030. *12 15o with the ET-DLE085/DLE055. *13 With legs at shortest position. *14 Average value. May differ depending on models. *15 The operating temperature range is 0 oC to 40 oC (32 oF to 104 oF) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 oC (104 oF) (35 oC (95 oF) in HIGH ALTITUDE MODE) when the projector is being used with LAMP SELECT set to DUAL and LAMP POWER set to HIGH, the light output may be reduced approximately 20 % to protect the projector. NOTES ON USE 1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock. 2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a loud sound, or fail to illuminate, due to impact or extended use. 3. The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions: * Never place objects on top of the projector while it is in operation. * Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projector's exhaust openings. * Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup.


Reviews (0)

Be the first to review this product.
Additional Info

Additional Info

18.30 KGS