Panasonic

Panasonic PT-DW750BE WXGA 7000 Lumen High Brightness LCD Installation Projector

$7,195.00
Current stock: 0
Description

Description

Panasonic PT-DW750BE WXGA 7000 Lumen High Brightness LCD Installation Projector Panel.IconsPana3Y16103LCDDLink Overview Specifications What's In The Box Video Key Features * 7,000 ANSI Lumen, WXGA (1280 x 800) 16:10 native resolution * 3,000:1 Contrast ratio, 2 x 310 W UHM lamp * Video In: HDMI, DVI-D, 5 BNC, VGA * Built-in Wired LAN, Digital Link/ LAN * Support Daylight view basic technology, DICOM compatible, Corner keystone correction, Edge blending, Wide selection of Optional Lenses and more Outstanding Images with Low-Noise Operation Panasonic PT-DW750BE WXGA 7000 Lumen High Brightness LCD Installation Projector Download Brochure Download Manual Distance Calculator High Brightness and Excellent Contrast Panasonic projector display Resolution A dual-lamp system using two newly developed, high-output 310 W lamps provides high brightness of 8,200 lm for the PT-DX820 and 7,000 lm for the PT-DZ780/DW750. Full-HD Ready WUXGA Resolution (PT-DZ780) The PT-DZ780 features native WUXGA resolution for full-HD viewing. This brings you lifelike projection of intricate, highly detailed images. Virtually Un-noticeable Operation with 30 dB in Normal Mode* Thanks to a carefully designed airflow control system and cooling fans, operation noise is dramatically reduced to 30 dB even when the projector is used with the lamps at full power in normal mode*, making the PT-DZ780 Series the quietest in its class.** The projector intakes air from the bottom of the unit and exhausts it from the back, eliminating openings in the front and sides to eliminate noise leakage. The newly developed fans are also positioned to enable the fans to operate efficiently with slower rotation and less noise. * 28 dB with the lamp power set to Eco. ** For a 1-chip DLP(TM), projector with brightness of 7,000 lm or higher The Dynamic RGB Booster Enhances Both Brightness and Color Reproduction Panasonic's Dynamic RGB Booster achieves high image quality with levels of color reproduction and brightness that make each color stand out. It combines Panasonic's proprietary Vivid Color Control technology with a Lamp Modulation Drive System for a 1-chip DLP(TM), projector that produces bright and vivid colors. Images are analyzed frame by frame, and scene-linking and real-time modulation are used to achieve high brightness and vivid color reproduction. Conventional System Because the lamp power was fixed, color reproduction was enhanced by sacrificing brightness. Dynamic RGB Booster Images are analyzed frame by frame, and the lamp output is modulated to match each scene. This achieves optimal brightness and color reproduction for a wide variety of scenes. Conventional System Dynamic RGB Booster The boost amount is controlled in real time as the images are projected. Note: The above images are simulated. Detail Clarity Processor Brings Depth and Clarity to Details Detail Clarity Processor Brings Depth and Clarity to DetailsThis advanced image-processing circuit analyzes the video signal frequency range for each scene by extracting data on the distribution of high, mid, and low-frequency components, and brings out fine details accordingly. The resulting images have a more natural, three-dimensional appearance with crisp, clear detail. System Daylight View 2 for Enhanced Color Perception Image details are less clear when a projector is used in a room with the lights on. Panasonic's System Daylight View 2 improves brightness perception by adjusting sharpness, gamma curves, and color corrections. This produces crisper, more stunning images with vivid colors even under bright conditions. DICOM Simulation Mode* Panasonic DICOM Simulation ModeThis imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity. * This product is not a medical instrument. Do not use it for actual medical diagnosis. Rec. 709 Mode for HDTV Projection Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source are projected. Waveform Monitor Function Waveform Monitor FunctionWhen the output level of the source device fluctuates due to the performance of the device or its cable connections, the original black and white levels of the image content cannot be reproduced correctly. With the PT-DZ780 Series projector you can view the waveforms on the screen and adjust the settings either automatically or manually as you prefer. Full 10-Bit Image Processing The use of a full 10-bit image processing system provides smooth tonal expression. For example, skin tones appear natural and true to life. Advanced Technologies for Excellent Image Quality 3D Color Management System The characteristics of the human eye tend to cause changes in colors when images are viewed close-up on a large screen. Changes in color saturation, hue, and brightness differ from color to color. 3D Color Management corrects these changes to produce accurate colors that are very close to the original images, even when viewed on a large screen. Dynamic Sharpness Control Only the pixels in image areas with a small change in brightness level are sharpened. This greatly reduces noise amplification and delivers clear, natural-looking images. Digital Noise Reduction The mode is selectable from 1, 2, 3, and off to match the level of noise. AI Scene Control The lamp brightness is automatically optimized to match the characteristics of the picture in real time, dramatically increasing the dynamic range, accurately rendering black portions of the screen as deep, dark blacks, and achieving a stunningly high contrast ratio of 3,000:1*. * With the CONTRAST MODE on. 2,400:1 for the PT-DX820. 2:2 Pulldown Mode This mode projects 24p film content at 48 Hz to reduce judder. sRGB Compatibility Full compatibility with the sRGB color space enables highly accurate color reproduction. Long-Lasting Lamp Life for up to 4,000 Hours* The PT-DZ780 Series projectors employ newly developed high-power 310 W lamps that have a long replacement cycle of up to 4,000 hours* to help lower the total cost of ownership. Lamp mode Brightness (lumens) Lamp replacement cycle (hours) PT-DZ780 PT-DW750 PT-DX820 Dual: Normal 7,000 8,200 4,000 Dual: Eco 5,600 6,560 6,000 Single: Normal 3,500 4,100 8,000 Single: Eco 2,800 3,280 12,000 * When the Lamp Power is set to Normal. The usage environment affects the lamp replacement cycle. Dust-Resistant Optical Block The optical block, the heart of the projector, is hermetically sealed to resist the effects of dust and other particles in the air, which makes it possible to remove the air filters for optics. It also contributes to the low TCO. Dual-Lamp System Prevents Image Interruptions This system eliminates the interruption if a lamp should fail (in dual-lamp operation mode). The Lamp Relay mode also operates the lamps alternately to enable 24/7 projection.* Liquid Cooling System for a DLP(TM), Chip Panasonic's unique liquid cooling system directly cools the DLP(TM), chip to improve performance and enable operation up to 45oC (113oF).* This allows use in a wider variety of environments, while stabilizing performance and keeping the unit quiet even in harsh conditions. It also contributes to realizing the compact body. Plus, Panasonic's liquid cooling system is hermetically sealed, so you don't need to replenish the liquid. * The operating temperature range is 0oC to 40oC (32oF to 104oF) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40oC (104oF) (35oC (95oF) in High Altitude mode) when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector. DIGITAL LINK Translits Digital Signals up to 150m (492ft) with a single cable. Transmits Digital Signals up to 150 m* (492 ft*) with a Single CableDIGITAL LINK is an original function added to HDBaseT(TM), technology. Equipped with a DIGITAL LINK terminal, the PT-DZ780 Series projector allows transmission of HDMI, uncompressed HD digital video, and control signals (Ethernet, RS-232C) for up to 150 m* (492 ft*) through a single CAT5e (STP) cable or higher. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations. Optional ET-YFB200G Digital Interface Box for Easy Setup Used together with the new ET-YFB200G DIGITAL LINK Switcher featuring two DIGITAL LINK outputs and high-speed input switching, the ET-YFB100G Digital Interface Box, or other compatible equipment,** the installation of this projector is easier than ever, without any need for external receivers. The input signal can also be easily switched*** from control panel or the ET-YFB200G/YFB100G or remote control of the projector to enable attractive presentations or lessons using multimedia content. The projector can be controlled by either serial or LAN communication. Optional ET-YFB200G DIGITAL LINK Switcher for Easy Setup Also Supports Other Manufacturers' Peripheral Equipment DIGITAL LINK is an original function added to HDBaseT(TM), technology. Used together with the new ET-YFB200G DIGITAL LINK Switcher, or other compatible equipment, the installation of this projector is easier than ever, without any need for external receiver. Flexible Installation The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility during installation. It lets you easily make adjustments with the remote control. The unit can also be rotated 360 degrees vertically. This means you can install it at any angle you want, to accommodate different installation conditions. Flexible installation Geometric Adjustment for Specially Shaped Screens This function adjusts the image for projection onto spherical, cylindrical and other specially shaped screens. You can make the adjustment easily using only the remote control, with no external equipment needed. 4-Corner Adjustment and Keep Aspect Off functions also simplify fine adjustment. Geometric Adjustment for Specially Shaped Screens Note: Advanced skills are necessary to use a computer to control geometric adjustment. Consult your dealer. Multi-Screen Support System Seamlessly Connects Multiple Screens The Multi-Screen Support System optimally adjusts multiple screens: Edge blending, Color matching and Digital image enlarging. Edge Blending The edges of adjacent screens can be blended and their luminance controlled. Color Matching This function corrects for slight variations in the color reproduction range of individual projectors. Digital Image Enlarging The PT-DZ780 Series features a digital zoom function that allows images to be enlarged up to 10 times (horizontally and vertically).* Up to 100 units (10 x 10) can be edge-blended at a time to create large, multi-screen images. * While the input resolution will not change, maintaining image quality will not be possible for those images that are enlarged horizontally and vertically via the digital zoom function. Backup Input Setting* Assures Reliability and Optimizes Performance The Backup Input Setting allows the signal to be switched to the backup input signal as seamlessly as possible when the input signal is disrupted.* This function ensures high reliability and is ideal for critical control rooms, projection mapping, staging, and other applications where images should not be interrupted. * The combination of the primary/secondary input terminals is fixed. Use the combination of DVI-D (primary) and HDMI (secondary) terminals. The Backup Input Setting is enabled only when the input signal to the primary and secondary terminals is the same. Note: Please contact your sales representative for information on the Backup Input Setting. (Contact Information) A Wide Selection of Optional Lenses A wide variety of lenses add versatility and flexibility to projector installation. Long-throw zoom lenses, a short-throw lens, and an ultra-short-throw lens, in particular, make it easier to adapt your projector to the installation site compared with other brand systems. The lenses attach and detach with one-touch ease. Picture-in-Picture (P-in-P) Function* Two different image sources can be simultaneously displayed.* The size and position of both main and sub windows can be changed for more flexible and effective image presentations. * The Picture-in-Picture function cannot be used for some input signals or some selected inputs. Multiple Terminals for System Versatility A wide array of terminals includes a DVI-D (HDCP compliant), HDMI, and two sets of RGB inputs, to support a broad range of projection needs. The serial terminal (RS-232C) can be used to easily connect and operate AMX and Crestron control systems. A LAN/DIGITAL LINK connector enables easy remote monitoring and control, and simplified cabling. The PT-DZ780 also features an SDI (SD-, HD-, and 3G-SDI) input terminal. Note: HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Easy Remote Monitoring and Control over a LAN Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall projector status. In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC. The wired LAN terminal is compatible with PJLink(TM), (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors. Crestron Connected(TM), and AMX Device Discovery The LAN terminal allows a computer connected to the network to use Crestron Connected(TM), application software to manage and control system devices. Besides, the AMX Device Discovery technology is built in the PT-DZ780 Series projectors. Optional Early Warning Software ET-SWA100 Series Compatible Early Warning Software ET-SWA100 monitors projectors and. displays that are connected to an intranet and informs you when an abnormality is detected or predicted,* and when there are symptoms of trouble. This minimizes downtime to provide more stable operation, saving time and reducing costs for maintenance and service. * Please note that the software does not guarantee the prediction of all device breakdowns in all instances. Other Valuable Features Mechanical lens shutter Scheduling function Direct power off 30 m long-range wireless remote control Control device setup function ID assignment for up to 64 units Built-in test pattern Selectable 10-language on-screen menu (English, German, French, Spanish, Italian, Portuguese, Russian, Japanese, Chinese, Korean) Built-in closed caption decoder (NTSC and 480i (YCBCR) only) Standby power consumption of only 0.3 W* RoHS Directive compliant Effective theft prevention with the Startup Logo** and chain opening All PT-DZ780 Series projectors are carefully manufactured at the Panasonic factory in Japan, under strict quality control. This is another, very important advantage of a Panasonic projector. * Standby mode: Eco. When Standby mode is set to Eco, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal. ** Logo Transfer Software required. Specifications Model PT-DW750 PT-DX820 Power supply 100-240 V AC, 9.0-4.0 A, 50/60 Hz Power consumption 790 W (810 VA) (0.3 W when STANDBY MODE set to ECO*1, 3 W when STANDBY MODE set to NORMAL) Dissipation BTU 2,696 BTU/hour (without light output: 2,601 BTU/hour) DLP(TM), chip Panel size 16.5 mm (0.65 in) diagonal (16:10 aspect ratio) 17.8 mm (0.7 in) diagonal (4:3 aspect ratio) Display method DLP(TM), chip x 1, DLP(TM), projection system Pixels 1,024,000 (1,280 x 800) pixels 786,432 (1,024 x 768) pixels Lens PT-DZ780/ DW750/ DX820 Powered zoom (throw ratio 1.8-2.5:1), powered focus F 1.7-1.9, f 25.6-35.7 mm PT-DZ780L/ DW750L/ DX820L Optional powered zoom/focus lenses and fixed-focus lens Lamp 310 W UHM lamp x 2 Screen size (diagonal) 1.27-15.24 m (50-600 in), 1.27-5.08 m (50-200 in) with the ET-DLE055, 2.54-8.89 m (100-350 in) with the ET-DLE030, 16:10 aspect ratio 1.27-15.24 m (50-600 in), 1.27-5.08 m (50-200 in) with the ET-DLE055, 2.54-8.89 m (100-350 in) with the ET-DLE030, 4:3 aspect ratio Brightness*2 7,000 lm (dual-lamp, LAMP MODE: NORMAL) 8,200 lm (dual-lamp, LAMP MODE: NORMAL) Center-to-corner uniformity*2 90 % Contrast*2 3,000:1 (full on/full off) 2,400:1 (full on/full off) Resolution 1,280 x 800 pixels (Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.) 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.) Scanning frequency SDI 3G-SDI - HD-SDI - SD-SDI - HDMI*3/DVI-D fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 25-162 MHz RGB fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 20-162 MHz YPBPR (YCBCR) f H: 15.75 kHz, f V: 60 Hz [480i (525i)] f H: 15.63 kHz, f V: 50 Hz [576i (625i)] f H: 45.00 kHz, f V: 60 Hz [720 (750)/60p] f H: 33.75 kHz, f V: 60 Hz [1035 (1125)/60i] f H: 28.13 kHz, f V: 50 Hz [1080 (1125)/50i] f H: 27.00 kHz, f V: 24 Hz [1080 (1125)/24p] f H: 33.75 kHz, f V: 30 Hz [1080 (1125)/30p] f H: 56.25 kHz, f V: 50 Hz [1080 (1125)/50p] f H: 31.50 kHz, f V: 60 Hz [480p (525p)] f H: 31.25 kHz, f V: 50 Hz [576p (625p)] f H: 37.50 kHz, f V: 50 Hz [720 (750)/50p] f H: 33.75 kHz, f V: 60 Hz [1080 (1125)/60i] f H: 28.13 kHz, f V: 25 Hz [1080 (1125)/25p] f H: 27.00 kHz, f V: 48 Hz [1080 (1125)/24sF] f H: 67.50 kHz, f V: 60 Hz [1080 (1125)/60p] Video/YC fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] Optical axis shift*4 Vertical +60%, -16% from center of screen (powered) +50%, -13% from center of screen (powered)*5 Horizontal +30%, -10% (+28%, -10% with the ET-DLE085) from center of screen (powered) Keystone correction range Vertical 40o*6*7, horizontal 15o Keystone correction range with the optional upgrade kit ET-UK20*8 - Installation Ceiling/floor, front/rear Terminals SDI IN - HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP) DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR/YC/Video x 1) RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1) SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant) SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant) REMOTE 1 IN M3 x 1 for wired remote control REMOTE 1 OUT M3 x 1 for link control (for wired remote control) REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel) LAN / DIGITAL LINK RJ-45 x 1 (for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink(TM),, Deep Color, compatible with HDCP) USB DC OUT (5 V, 0.9 A) Cabinet materials Molded plastic Dimensions (W x H x D) PT-DZ780/ DW750/ DX820 498 x 175*11 x 521 mm (19-19/32 x 6-7/8*11 x 20-1/2 in) (with supplied lens) PT-DZ780L/ DW750L/ DX820L 498 x 175*11 x 508 mm (19-19/32 x 6-7/8*11 x 20 in) (without lens) Weight*12 PT-DZ780/ DW750/ DX820 Approximately 17.8 kg (39.2 lbs) (with supplied lens) PT-DZ780L/ DW750L/ DX820L Approximately 17.0 kg (37.5 lbs) (without lens) Operation noise*2 30 dB (dual lamp operation, lamp mode: NORMAL), 28 dB (dual lamp operation, lamp mode: ECO) Operating temperature 0oC-45oC [32oF-113oF] (less than 1,400 m [4,593 ft] above sea level), 0oC-40oC [32oF-104oF] (between 1,400 m and 2,700 m [4,593 ft and 8,858 ft] above sea level)*13 Operating humidity 10-80 % (no condensation) Applicable software Logo Transfer Software, Multi Projector Monitoring & Control Software Supplied accessories Power cord with secure lock, wireless/wired remote control unit, batteries (R03/AAA type x 2), software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) * Product numbers vary depending on the market. The general guideline is as follows: The product number in the Americas and Taiwan is PT-DZ780KU/DZ780WU/DZ780LKU/DZ780LWU, PT-DW750KU/DW750WU/DW750LKU/DW750LWU, and PT-DX820KU/DX820WU/DX820LKU/DX820LWU. The product number in Europe, CIS, Asia (except Taiwan), Oceania, Middle East, and Africa is PT-DZ780KE/DZ780WE/DZ780LKE/DZ780LWE, PT-DW750KE/DW750WE/DW750LKE/DW750LWE, and PT-DX820KE/DX820WE/DX820LKE/DX820LWE. *1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 DIGITAL LINK input compatible signal is the same as HDMI input compatible signal. *4 Optical axis shift cannot be operated with the ET-DLE055, and the optical axis is fixed with the ET-DLE030. *5 +45 %, -13% from center of screen with the ET-DLE085. *6 22o with the ET-DLE085/DLE055. *7 +5o with the ET-DLE030. *8 Up to a total of 55o during simultaneous horizontal and vertical correction. *9 40o with the ET-DLE150/DLE250/supplied lens. *10 15o with the ET-DLE085/DLE055. *11 With legs at shortest position. *12 Average value. May differ depending on models. *13 When using the projector at elevations lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 35 oC (95 oF) or higher, the light output may be reduced to protect the projector. When using the projector at elevations between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 oC (77 oF) or higher, the light output may be reduced to protect the projector

Reviews

Reviews (0)

Be the first to review this product.
Additional Info

Additional Info

Weight:
17.00 KGS